Author: adminbt

🛞 Tyre Care in Pakistan – Tips to Make Your Tyres Last Longer

In Pakistan’s diverse driving conditions — from hot city roads to rough rural tracks — tyre care is essential for safety, performance, and long tyre life. Whether you drive daily in Lahore, Karachi, Islamabad, or across motorways, here’s how you can take care of your tyres:

✅ 1. Check Tyre Pressure Regularly

Under-inflated or over-inflated tyres wear out quickly and affect fuel efficiency.
➡️ Ideal pressure is mentioned on your car’s door frame or manual.
✔️ Check tyre pressure every 2 weeks, especially before long trips.

✅ 2. Wheel Balancing and Alignment

Pakistan’s roads can cause tyres to misalign or become unbalanced.
➡️ If your car pulls to one side or vibrates, get it checked.
✔️ Do alignment and balancing every 6,000 – 8,000 km.

✅ 3. Tyre Rotation

Rotate tyres (front to back and vice versa) to ensure even wear.
✔️ Recommended every 8,000 – 10,000 km or as per your car manual.

✅ 4. Avoid Overloading

Overloading your car puts excess pressure on tyres, causing early damage.
✔️ Stick to the manufacturer’s load limit for better tyre life.

✅ 5. Inspect for Cuts, Bulges, or Punctures

Pakistan’s rough roads can damage tyres easily.
✔️ Regularly inspect tyres for visible damage and replace if needed.

✅ 6. Use Quality Tyres

Invest in branded, original tyres from trusted sellers like TyreFirst.com to avoid counterfeit or expired stock.

✅ 7. Drive Smoothly

Harsh braking, sharp turns, or sudden acceleration reduces tyre life.
✔️ Drive steadily to keep tyres in good condition.

🇵🇰 Best for Pakistan’s Conditions:

Choose tyres suited for hot climate, city roads, or off-road routes, depending on where you drive most.

Need expert tyre care or tyre change at home in Pakistan?
📦 Order online from brandnewtyres.com – We deliver and install tyres at your doorstep!

Tire Care in Pakistan – Tips to Make Your Tires Last Longer

🛞 How to Change a Tyre at Home – Step-by-Step Guide

Changing a flat or damaged tyre at home is simple if you follow these easy steps. Here’s how to do it safely and correctly:

1. Park Your Car on a Safe, Flat Surface

Find a level area away from traffic. Apply the handbrake and turn on hazard lights.

2. Gather Your Tools

You will need:

• Car jack

• Wheel spanner or lug wrench

• Spare tyre

• Wheel wedges or bricks (optional but helpful)

3. Loosen the Wheel Nuts

Before lifting the car, slightly loosen the nuts with the spanner. Don’t remove them yet — just break their tightness.

4. Lift the Car Using the Jack

Place the jack under the correct lifting point (usually mentioned in your car manual) and raise the vehicle until the tyre is completely off the ground.

5. Remove the Old Tyre

Unscrew and remove all the nuts, then carefully pull the tyre off.

6. Mount the Spare Tyre

Align the spare tyre with the bolts and slide it into place. Hand-tighten the nuts for now.

7. Lower the Car and Tighten the Nuts

Use the jack to lower the car back to the ground. Then use the spanner to fully tighten the nuts in a crisscross pattern for even pressure.

8. Pack Up and Double-Check

Put the tools and flat tyre back in the trunk. Make sure all nuts are tight and the spare tyre is secure.

✅ Quick Tips:

• • Always check your spare tyre regularly for air pressure.

  • If you’re unsure, it’s better to call a professional or roadside service.

  • Use a reflective triangle or torch at night for safety.

  • Avoid driving long distances on a spare tyre (especially space-savers).

How to Change a Tire at Home – Step-by-Step Guide